Pennebaker Logo
Home S-240 Laser Screed 3D Profiler System      References Contact Us

S-240 Laser Screed Specifications
Overall Width: 7'-8" Outside of Tires
14'-1" at Screed Head
Overall Length: 18'-3" Boom In
36'-1" Boom Out
28'-5" Transport
Overall Height: 8'-3"
Weight: 15,400 lbs.
Boom Reach: 20 ft.
Screed Width: 12 ft.
Screed Area Per Pass: 240 sq. ft.
Fuel Capacity: 27 gallons
Hydraulic Oil Capacity: 27 gallons
Upper Frame Rotation: 360 degrees
Verticle Stabilizers: 4 hydraulically-operated stabilizer pads
Drive Train: Hydraulic-powered four wheel drive
Axles - Two: Drive Steer Type
Operating Modes: 2 Wheel, 4 Wheel, Crab Steer
Tires/Wheels: 35" 10 ply/16" rims
Maximum Speed 3.2 MPH
Engine Type: 4 Cyl., 4 stroke, direct-injection,
oil-cooled diesel engine
178 cu. in.
Engine Make: Deutz F4M1011F
Horse Power: 64.5 HP @ 300 rpm
Miscellaneous Features: 12 volt, key on & off, engine oil cooler, hydraulic oil cooler, cold weather start, fuel-water separator
Laser Type: Custom designed Laser System with 2 independently mounted laser receivers with on-board computer control panel. Continuous elevation monitoring at a rate of 10 times per second.
Screed Type: Hydraulic powered laser controlled screeding hed mounted on a telescopic boom. Self-leveling screed head consists of a plow that removes excess concrete, an auger that cuts concrete to grade, and a vibrator that consolidates material at 300 VPM.

Office: 319-366-1290 • Mobile: 319-270-4971 • Estimator/Shop: 319-857-4163 • Fax: 319-366-1290
Pennebaker Construction, Inc. • 1761 Memorial Dr. • Cedar Rapids, IA 52403

© Copyright 2001 Pennebaker Construction Inc. & William Easton Design. All rights reserved.